Epson printers are one of the most widely preferred printers for both personal and professional use. These printers are known for reliability, cutting-edge technology, and excellent performance. Over the years, these devices have gained massive popularity among users mainly due to their multifunctional features, making them compatible with printing documents and scanning. Another reason which makes Epson printers more feasible is their user-friendly features.
What is Epson Error Code 0x95?
There is no doubt that your Epson printer prints excellently. But suddenly an error might occur in it which would disturb your printing queue.
It can occur when the ink pad gets full saturation or due to the print head’s irregular cleaning. This error code also comes along with a message “The parts inside your printer are reaching the end of service life.” If you are clueless about the ways to solve the issue, keep on reading this blog to gain a fair idea regarding the process to address the issue. Epson printer error turns the power off and then on again.
Situations When You Can Get the Epson printer in error state:
Usually, the appearance of this error occurs when the printer’s ink pad has reached the saturation level. However, there are some other situations when you can get this error, such as:
Probable Reasons for the Occurrence of Epson Error Code 0x95
Epson inkjet products have a finite lifespan. It reaches a condition when it fails to provide its users with satisfactory print quality. This happens because your printer’s specific components have reached the end of their usable life and will not work further until and unless it is serviced. The printer is turned off error. Thus, when your Epson printer’s ink pads reach a specific limit, they become saturated, and your printer displays this error code.
Technically speaking, your printer’s ink pads are porous, and they collect the ink that is not being used on the printed pages. It keeps collecting the ink during cleaning cycles, at the time of the product’s initial setup, or when your printer is bound to print borderless photographs. Thus, when you have used your printer for some years, these ink pads become full of ink and lose their capability to absorb more ink. Under such circumstances, your device displays error code 0X95.
Elementary Solutions to Troubleshoot Epson Error Code 0x95:
Before visiting a service center to fix the printer, you can try out the recommended steps to troubleshoot and quickly fix error code 0x95 by yourself. Follow the instructions provided below:
Check the Ink Heads of Your Epson Printer
At first, check the ink head of your Epson printer. Make sure that it is properly seated. Several reasons lead to the generation of this error code in your printing machines, such as the digital eye, full ink pad, dirty print head, unbalanced ink, and ink sitting under the maintenance box of your printer.
To solve this issue, switch off your printer and unplug it entirely for a couple of seconds. Now try to remove and replace the sponge and clean the digital eye.
Perform Manual Troubleshooting with the Epson Printer
You need to follow these steps carefully to troubleshoot your Epson printer error code 0x95 manually:
- Power on your Epson printer
- Hold the “Press + Hold” button altogether to stop ink power buttons
- Now wait for sometime before you switch it off
- Please turn it on to check whether the problem persists
- Run System Under Safe Mode
Try to run your Windows PC under Safe mode and then check whether you are still receiving this error. If you always receive the error, move on to the next step to troubleshoot your Epson printer.
Uninstall the Recently Installed Software from Your System
Error code 0X95 might occur due to installing a new software program. Due to the incompatibility in the software program’s settings with the system, you can encounter this error. For that, you need to follow these steps to uninstall the software from your system and fix this error instantly:
- Click on the “Start” button and select “Programs and Features.”
- Go to the option through Control Panel.
Now uninstall the recently installed software programs from your system by choosing the particular program/programs by tapping the “Uninstall” button.
By following the steps listed above, you should be able to fix Epson printer error code 0x95. In case things don’t work in your favor, it is advised to ask the professionals for assistance.